Difficulty Level

Tools/Supplies Needed:

• none

Procedure:

• before removing the factory until, ensure that you have the security code if you are planning on using the radio in the future
• disconnect your vehicle's battery
• push the two tangs into the radio face either with your finger or the assistance if your vehicle's key
• the tangs will spring outwards
• use both your hands to carefully pull the stereo out from the dashboard
• once it's far enough out, grab onto the outside and assist the stereo out further
• disconnect the antenna wire which simply pulls straight out
• remove the round electrical connector by pulling straight out
• then disconnect the two electrical connectors by depressing the tangs and pulling straight out
• reinstallation in reverse of removal